Description: TL-4M Ampervoltommeter is a transistor tester without batteries and probes.
Ampervoltommeter-tester of transistors type TL-4M is designed to measure DC current and voltage, alternating sinusoidal current with a frequency of 50 Hz, alternating sinusoidal voltage with a frequency of 40-15,000 Hz, DC resistance and parameters of low-power transistors
Iko is the reverse current of the collector junction (collector-base transition);
IEO is the reverse current of the emitter junction (emitter-base transition);
Icn is the initial collector current;
ẞ is the static current gain (determined by calculation ẞ = Ik / Ib
The device is designed for radio amateurs, and can also be used in laboratory and workshop conditions.
The device is designed to operate at temperatures from minus 10 ° C to plus 50 ° C and relative humidity up to 80%.
TECHNICAL DATA TL4-M
Measurement limits
The final value of the scale corresponds to:
when measuring the DC strength of OD-0.3-1-30-300 and 3000 mA;
when measuring the strength of alternating current 3-30-300 and 3000 mA;
when measuring DC voltage 0.1_3-10-30-100-300 and 1000 V;
When measuring alternating voltage 1-3-1 O-30-100-300 and 1000 V.
When measuring resistances, the final value of the working part of the scale (number 300) corresponds to:
0.3 kΩ at multiplier X1
3 kΩ at a multiplier of X10
30 kΩ at X100 multiplier
0.3 MΩ at X1000 multiplier
3 MΩ at a multiplier of X10,000
The last digitized point of the scale 500 (in the non-working part of the scale) corresponds to 0.5 kOhm, 5 kOhm, 50 kOhm, 0.5 MΩ, 5 MΩ with the same factors.
NOTE
Measurement at a multiplier of x10000 is performed using an external DC voltage source of 24-30 V.
ТЛ-4М Ампервольтомметр - испытатель транзисторов без батареек и щупов.
Ампервольтомметр-испытатель транзисторов типа ТЛ-4М предназначен для измерения постоянного тока и напряжения, переменного синусоидального тока частотой 50 Гц, переменного синусоидального напряжения частотой 40— 15 000 Гц, сопротивления постоянному току и параметров транзисторов малой мощности
Iко — обратного тока коллекторного перехода (переход коллектор-база);
Iэо — обратного тока эмиттерного перехода (переход эмиттер-база);
Iкн — начального тока коллектора;
ẞ — статического коэффициента усиления по току (определяется расчетным путем ẞ = Ik / Ib
Прибор предназначен для радиолюбителей, а также может быть использован в лабораторных и цеховых условиях.
Прибор рассчитан на работу при температуре от минус 10° С до плюс 50° С и относительной влажности до 80%.
ТЕХНИЧЕСКИЕ ДАННЫЕ ТЛ4-М
Пределы измерений
Конечному значению шкалы соответствует:
при измерении силы постоянного тока ОД—0,3—1—3—30—300 и 3000 мА;
при измерении силы переменного тока 3—30—300 и 3000 мА;
при измерении постоянного напряжения 0,1_3—10—30—100—300 и 1000 В;
при измерении переменного напряжения 1—3— 1 о—30— 100—300 и 1000 в.
При измерении сопротивлений конечному значению рабочей части шкалы (число 300) соответствует:
0,3 кОм при множителе X1
3 кОм при множителе X10
30 кОм при множителе X100
0,3 МОм при множителе X1000
3 МОм при множителе X10 000
Последней оцифрованной точке шкалы 500 (в нерабочей части шкалы) соответствует 0,5 кОм, 5 кОм, 50 кОм, 0,5 МОм, 5 МОм при тех же множителях.
ПРИМЕЧАНИЕ
Измерение при множителе х10000производится с помощью внешнего источника постоянного напряжения 24-30 В.
The basic language of the Site is Ukrainian. Translation from other languages is brought to you by automatic machine translation.
Dear Users, please be advised that the machine translation may be not accurate. In case of complains regarding the accuracy of the translation, the original text posted by the Seller has the upper hand.
Comments 1